Language Español Inglés
Follow Us Add INDEF to my favorites Follow Us on Tweeter Follow Us on Facebook

CF-1.6

 

+ consultar

CF-1.6

Galería

  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6
  • CF-1.6

Detalles


Type: Forced circulation.
Maximum temperature: 550ºC.
Heating power: 39kw.
Voltage: 3x380v. with Neutral.
Heating chamber: 110cm. width x 130cm. high x 110cm. background.
Exterior measurements: 156cm. of width x 248cm. high x 156cm. background.
Capacity of the camera in liters: 1573 liters.
Load capacity: 800kg of material to be treated.
Weight: 1000kg.
Gas outlet: 2 "gas elbow.
Forced circulation of air: By means of two (2) centrifugal fans type sirocco located in the ceiling and that impel the air toward the side walls where the heating elements are to return then through the load. The movement of the air is from top to bottom in the heating elements and from bottom to top in the load. The motor, shaft and rotor are mounted in a plug type rack that facilitates its removal for system maintenance.
Heating elements: Indef® ceramic fiber heating panels and resistive wires type Kanthal A-1, located on the side walls, easily replaceable calculated with low load density for a long service life. The heating is done by radiation and air forced convection.
Insulation: Through panels with bulk compacted ceramic fiber.
Cabinet with wheels: Manufactured with angled profiles and sheet DD No. 18 for industrial use, electrically welded. With phosphatizing protection and thermo-convertible epoxy enamel finish.
Muffle: Built with profiles and sheet of AISI 304 stainless steel, includes in the portico, door, bottom and roof.
Door: From a leaf pivoted to hinges and latch to latch, with weatherstrips and fiberglass tape. Labyrinth closure system to minimize heat loss.
Loading rack: AISI 304 stainless steel pipe structure with side protection in unfolded AISI 304 stainless steel material to avoid contact with the resistances during loading and unloading, supporting five (5) sliding grill shelves built with pipes stainless steel AISI 304.
Temperature sensor: One (1) thermocouple type "K".
Power control: Via three-phase solid state relay.
Control module: Attached to the side of the oven. Contains: Temperature controller, power solid state relay, general key switch (security key).
Performance: Indef® guarantees uniformity of temperature in the heating chamber at +/- 5 ° C with measuring points 4cm away. of the internal surface of the heating chamber.
Environmental requirements: The outside temperature of the cabinet does not exceed 50ºC to keep the TGBH thermal load values ​​below 30ºC. The Equivalent Continuous Sound Level does not exceed 90 d B (A).
Accessories: Loading rack. User's manual
Controller: DH-101 (with optional PC output).



 

 

You can send your question using the form below.

In the near future we will contact you.

Remember that all fields are required.

Thank you very much.